BC100XLT.2
                       Innovations

The 100XLT feature set includes new surprises.  The first
channel of each active bank is a priority channel, making
10 priority channels in all.  There doesn't appear to  be
10  levels  of  priority, but channel 1 priority seems to
take precedence over the other priority  channels.   When
the  priority  is switched on, the 100XLT samples all the
priority channels every 2 seconds.   When  the  power  is
turned  off,  then  on  again,  the  priority key must be
pressed manually.

Let's see, did I program in that  new  K-Mart  frequency,
154.6  MHz  somewhere?  Just type 154.6, ENTER when posi-
tioned to a channel you don't care  about,  and  the  LCD
will  display  "CH 29", for instance, if you already have
154.6 MHz in channel 29.

Stated a different way, if one tries to type a  frequency
into  the  100XLT  that  has  already  been programmed in
another memory channel, the display will flash  in  which
Stated a different way, if one tries to type a  frequency
into  the  100XLT  that  has  already  been programmed in
another memory channel, the display will flash  in  which
channel  it  has  been  programmed.   One can override by
depressing ENTER again, and the frequency will be  stored
in the current channel.

This is a great feature, especially in a scanner with  so
much memory.
CONTINUED IN BC100XLT.3