BC200XLT.2

REASSEMBLY

        7. Insert the top of the front panel into the slot under the
           volume/squelch control panel and, noting carefully the alignment of
           the dual inline connector at the bottom of the board with the
           mating socket, press the front panel firmly into place. Be sure
           that the holes at the bottom of the circuit board line up with the
           holes in the plastic standoffs below them. Insert the two screws
           and gently tighten them.

        8. Replace the back cover by inserting the top of the cover into the
           slot under the volume/squelch control panel; press the cover into
           place, insert and tighten the screws.

        9. Reposition the battery retaining spring (slotted side toward
           notched hole), insert the two remaining screws and gently but
           securely tighten them.

CONTINUED IN FILE BC200XLT.5