BC205XLT.1 UNIDEN/BEARCAT 200/205XLT TEST MODE by Bob Parnass, AJ9S According to the Uniden/Bearcat 200/205XLT Service Information Manual, the following procedure will load channels 1-25 with various test frequencies, and zero the remaining 175 channels: 1. Press and hold three keys: 2, 9, and MAN simul-taneously and turn the power switch on. 2. Set the power switch to the off position. 3. Repress and again hold three keys: 2, 9, and SCAN simultaneously and turn the power switch on. BC200/205XLT CELLULAR RESTORATION Note: It is unlawful to monitor cellular telephone conversations. It is possible to monitor signals from the deleted ranges even without conversion. Simply add 21.7 MHz to the deleted frequency and enter the higher (image) frequency. Reception is virtually identical in strength to that which would be heard on the deleted frequency. The frequencies deleted at the factory may be restored, but the procedure must not be attempted by anyone unfamiliar with electronic circuitry. Grove Enterprises assumes no liability for damage caused by this procedure. (I won't eighter! WA2ISE). The modification will void your warranty. CONTINUED IN FILE BC205XLT.4