C528.1

From : GB7OMM @ GB7OMM.#34.GBR.EU

Part 2...
Now let us look at the Battery pack (Model CBT 151).
Open  the two  parts and  take out  only that  one where  you see  the  sign  +
(positive).
Note  where the  first battery  is, Its  Positive pole  resting on  the  little
metallic  tab(  tongue)  having  the  shape and the characteristics of a corner
angle slipped off from its housing towards the top.
Do not worry, it is only fixed in and divides with cutters in the middle of the
corner/angle.
Be Careful when  separating with the  cutters, The two  parts may tend  to fall
apart, Thus, If you are not careful you can lose a piece.
If this happens, o not worry , but be very careful that this does not happen.
Take the smallest piece, Namely that which is mounteed next to the + symbol and
solder on top  of the terminals  the two diodes  in series opposite in between,
Namely an anode and a cathode.
Mind that the  pieces of the  terminals are chromed  metal ie on the point when
you intend to solder the join, It is  necessary you clean in a bit first with a
thin sanding paper,  Solder it and  try to slide  it away; you can also help by
using some soldering flux such as a deoxydising one.
Do this soldering, solder the diodes  to the very edges of the  resister (divie
the leads furthest most extreme side k cathode diod-resistance).


Part 3 To Follow....