C528.2

From : GB7OMM @ GB7OMM.#34.GBR.EU

Part 3.....

Now remount the first piece on  the capaciter moulded sockets of resistor of 33
ohms and diodes so that they can  be fixed in the restricted space at  the side
of the first battery.
Also replace the other piece of the  metal tab onto place and solder it  on top
of the terminal along the resister (on  to which is attached :- A anode  of the
diode.
That is Basically it.
One last  thing,Make absdolutely  sure that  there exists no kind of electrical
contact from the two two metal tabs from your solders.
Mount on the battery carriers  the six rechargeable batteries, check  again the
whole thing and  connect on the  switch of the  external feeder/power supply  a
voltage of 10 to 12 volts and let the batteries charge up.
The  apparatus can  then work  on batteries  and with  the power  supply;  When
working with the latter, The batteries will just charge up, In spite of all the
? modification...


END......