IC2410.7 MINI REPEATER FUNCTION OPERATION PROCEDURE: 1. Set frequency for both UHF and VHF. If necessary, set transmit offset and tone. 2. Hold "BAND" switch and "SET" switch. The memory number display will flash the letter "L". This indicates the 2410 is in the "Mini Repeater" mode. 3. Transmission by PTT is possible. If PTT is operated, the band which is indicated by flashing decimal point will be transmitted. This can be done even when in "MINI REPEAT" mode. In other words, PTT has a priority over the "MINI REPEAT" operation. Transmitted band will be switched by "UP" or "DN" key in the microphone. The flashing decimal point will indicate which band will be transmitted. 4. Mini Repeater function will remain even when power is turned off. To disable the repeater function, hold "SET" key until memory number display comes up.