PRO37 Subject: pro37 mod From: Bill Jones When modifying a friend's pro-37, I noticed that the diodes are numbered differently from the pro-34. There is no D-11. The row of diode positions is now numbered 011, 012, 013, etc instead of 9,10,11 etc. The proper diode to cut (from this bank), however, is (as was the case in the pro-34) the one closest to the bottom of the unit (unfortunately I forget the number, either 012 or 013, but it is obvious, there are only two diodes installed in the bank, and you cut the bottom one). The mod works well. This radio sure scans faster than the pro-34! -------------------------------------------------------------------------- Note: I haven't tried or verified this, proceed at your own risk. WA2ISE